适用物料 】：煤，煤矸石，炉渣，页岩，钢渣，石灰石，焦碳，方铅矿，菱铁矿，闪锌矿，褐铁矿，建筑垃圾，煤泥，污泥等。 [ Applicable materials ]: coal, coal gangue, slag, shale, steel slag, limestone, coke, galena, siderite, sphalerite, limonite, construction waste, slime, sludge, etc. The double crusher is suitable for crushing coal gangue, shale, coal slag, slag, dolomite, river pebble, construction waste and other materials in brick and tile factories. It solves the problem of using vermiculite and coal slag as additives and internal fuel for brick factories. The problem of crushing high-humidity materials for standard bricks and hollow bricks in rock production.
[Product introduction]: The double crusher has no sieve bottom, high hard material and high wet material to ensure that it is not blocked. The feed water content can reach 100% and the water discharge fineness 90% are all in 2MM (less than 1mm) 1MM (Below millimeters) accounted for 70%, wet and dry, production as usual in rainy days.
After a long-term inspection, Huashengming Heavy Industry has successfully designed and manufactured a new type of limestone crusher that can easily crush high-humidity materials. Double crusher (high-humidity material crusher) is mainly suitable for crushing coal gangue, shale, cinder, slag, construction waste and other materials in brick and tile factories. It solves the problem of using vermiculite and coal slag as additives and internal fuel for brick factories; using vermiculite The problem of crushing high-humidity materials for shale production of standard bricks and hollow bricks.
单锤式破碎机 的基础上改进而来的，算是种较新型结构的双无筛底粉碎机，该机是洗煤石和砖石的专用机型。 The double pulverizer is also called double hammer pulverizer. It is an improvement on the old single hammer pulverizer. It is a new type of double screenless bottom pulverizer. It is a special machine for coal and brick washing. type. 。 The double crusher (semi-wet hammer hammer crusher) can well solve the shortcomings of large water content in the open-air production. The screen-free design of the machine will not cause the problem of machine blockage, because the double crusher (hammer type) The pulverizer) is designed without sieve bottom and screen, so even if the moisture point of the material is large, it will not be blocked, and it can be produced normally even in rainy days . In addition, although the double crusher (semi-wet material crusher) does not have a sieve bottom, it uses two upper and lower rotors for crushing, and the particle size of the discharge is more uniform, and the ultra-fine, can be controlled below 2 mm. 。 The double crusher can be used for crushing vermiculite, coal slag, shale, and construction waste. It is an optional model for brick factories to use coal gangue as an additive . According to the user's material characteristics, the hammer head can be replaced with a hammer piece, which is suitable for crushing non-hard materials such as feed.
If your production site is uncertain and mobile equipment is needed during use, our company will improve the equipment according to your needs and design it to make it mobile. The mobile pulverizer can flexibly change the site, has good maneuverability, reduces the idle time of the equipment, saves the time of disassembly and assembly of workers, and greatly improves the production efficiency of multiple sites.
Bluestone crusher works:
Double-rotor upper and lower double crusher: Two sets of rotors connected in series, the material produced by the upper rotor is crushed again by the hammer of the lower rotor, which rapidly rotates, and the materials in the inner cavity collide with each other rapidly and smash each other to achieve hammer powder. The effect of material and powder is directly discharged. The raw materials enter the crushing cavity from the feeding port, and the hammers of the first group are continuously turned counterclockwise to slap the materials and smash each other to achieve the effect of hammer powder and powder. Then enter the second group of hammers and repeatedly beat The two sets of hammer heads smash the materials at a high speed, and when the materials are smashed to a predetermined fineness, they are discharged from the gaps of the hammers, thereby ensuring the fineness of the output particle size. The double wet material pulverizer produced by Huashengming Machinery uses a movable hammer head handle. After the hammer head is worn, it can be replaced and continued to be used. The hammer head can be used for three tops. At the same time, the design of the screen has no bottom at the discharge. Crushing coal gangue, shale, coal, cinder and other wet materials will not cause blockage.
Bluestone crusher performance characteristics:
Double-rotor upper and lower double shredders: Two sets of rotors connected in series, the material produced by the upper rotor is crushed again by the hammer head of the lower rotor that is rapidly rotating, and the materials in the inner cavity collide with each other at a rapid speed, and they are crushed to achieve hammer powder. The effect of material and powder is directly discharged.
2. There is no sieve bottom, high-humidity materials, and no clogging: The traditional pulverizer with a sieve screen is not suitable for raw materials with a moisture content higher than 8%. When the moisture content of the raw material is higher than 10%, it is easy to cause serious problems. The blockage prevents the hammer head from turning, the material cannot be discharged, and even burns out the motor, which seriously affects production.
There is no sieve bottom, high hard material, high wet material to ensure no blockage, the feed water content can reach 100% water, and the output fineness 90% is all 2MM (less than millimeter) 1MM (less than millimeter) accounts for 70%, Wet and dry, production as usual in rainy days. The design of the machine has no sieve bottom and no strict requirements on the moisture content of the material. There is no problem of blocking the sieve plate, and there is no problem of fine powder not being discharged in time and repeated crushing. Therefore, the crushing efficiency is high and there is no hammer Ineffective wear.
3. Double-rotor two-stage crushing, large output, output particle size below 3㎜, 80% below 2㎜ 4. Wear-resistant combined hammer: high alloy wear-resistant hammer. The hammer head and hammer handle are used in combination, only the hammer head is changed, and the hammer handle is not changed.
Fifth, the unique shift clearance adjustment technology: the hammer head does not need to be repaired after the wear, the mobile position is repeatedly used, the auxiliary hammer head can be used with three pairs of hammer heads.
6. Hydraulic manual starting casing: only one person can open and close easily, it is not only light, fast, safe and reliable, but also easy to maintain.
Bluestone Crusher Technical Parameters: